Audiopipe 1000 Watt 2-Channel Amp
- 55mm (H) x 176mm (W) x 260mm (L)
- 2.2" (H) x 6.9" (W) x 10.2" (L)
- Signal to Noise Ratio: 100dB
- Input Sensitivity: 0.25V - 5V
- Output power (RMS)
- Stereo 2 channel - 100w x 2 @ 4ohm
- Stereo 2 channel - 125w x 2 @ 2ohm
- Bridge 1 Channel - 300w x 1 @ 4ohm
- Built-in variable high pass and low pass crossover
- RCA line input/output jacks
- Electronic protection circuitry to protect the amp from short circuit, DC offset and thermal overload
- Remote subwoofer volume control
- Frequency response: 20Hz-20kHz
- Channel separation: >75dB
- Total harmonic distortion: <.05%
- Speaker impedance: 2ohm-4ohm
- Crossover frequency: 55hz-5.5kHz
- 12dB Stereo
- Bass boost: 0-18dB @ 45Hz
